Additional Features: Resolution bandwidth: 1 Hz to 10 MHz Displayed average noise level: -155 dBm (1 Hz) Phase noise: -113 dB (1 Hz) at 10 kHz Additional filters: Channel filters from 100 Hz to 5 MHz and RRC filters, FFT filters from 1 Hz to 30 kHz, EMI bandwidths and quasi-peak detector Measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc Measurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc. DANL typ.: -155 dBm (1 Hz) w/o preamp Phase-noise typ.: -113 dBc/Hz @ 10 kHz offset, CF 500 MHz Phase-noise typ.: -145 dBc/Hz @ 10 MHz offset, CF 500 MHz TOI typ.: 10 dBm 1-dB-compression point: 0 dBm 0.5 dB total level uncertainty up to 3.6 GHz <0.2 dB linearity error down to -70 dB IF digitizer 12 bit 32 MHz (20.4 MHz IF) IQ memory 2x128 ksamples 2.5ms sweep time in frequency domain 1 µs sweep time in time domain Up to 70 remote measurements/s via GPIB Up to 80 manual measurements/s (screen update) Supported Technologies: WCDMA/HSPA/HSPA+ GSM/EGPRS//EDGE Evolution/VAMOS CDMA2000® 1xEV-DO CDMA2000® 1xRTT TD-SCDMA GSM-R cdmaOne DECT WiMAX IEEE 802.16e-2005 and IEEE 802.16-2004 Bluetooth® (Basic Rate) LXI AM FM The ideal partner for both development and production, featuring good level measurement uncertainty, as well as excellent RF characteristics. The R&S FSP30 incorporates proven technology to enable best performance, reliability and ease of service. The Rohde & Schwarz FSP30 Spectrum Analyzer is capable of testing spurious emissions stipulated in the GSM specifications and has a firmware to allow adjacent-channel power (ACP) measurement to the W-CDMA/third-generation partnership project (3GPP). This measurement is implemented in the Rohde & Schwarz FSP30 by automatic test routines which make all necessary settings, measurements and filtering. The electronic attenuator for a spectrum analyzer increases the availability for use in production and allows a number of switching operations in a wear-and-tear-free setting range of 30 dB in 5 dB steps.